Used and New Equipment For Sale

Manufacturer: - 97 Listings

Refine search criteria by category, condition and region below.

Page 1 Of 4 Total

Page 1 Page 2 Page 3 Page 4

MH-280255	UNKNOWN " " ...Gravity Roller Conveyor
$ 14	GRAVITY ROLLER CONVEYOR ; 24" & 30" Widths all 10' sections Over 5000 Feet - Beautiful Condition! ; 24" Wide, 1.9" Rollers on 3" Centers all 1... Click for more.
	Very good condition	Year: N.A.
Midwest	Used Gravity Roller Conveyor in great condition. Many Sizes, pay pennies on the dollar!	Photos / Lit.

MH-280256	UNKNOWN " " ...Folding Wire Basket
$ 65	WIRE BASKETS - Used but in very good condition ; Wire Baskets, 60"X60" 48"H, 1/2 drop gate Was $130 Now: $65.00 Wire Baskets 48" X 65" X 42" ... Click for more.
	Very good condition	Year:
Midwest	Great Value on Used Wire Baskets in Very Good Condition	Photos / Lit.

MM-010803	UNKNOWN " " ...Drafting Table
$ 90	Drafting Machine 60" X 42" Table Size (Table Missing) Click for more.
	As-Is, good or bad	Year:
Midwest	Ready, Set..Draw!!!	Photos / Lit.

SD-010402	UNKNOWN " " ...BENCH GRINDER
$ 140	Double bench grinder with stand. Click for more.
	Fair Condition	Year:
Southeast	Versatile Grinder!	Photos / Lit.

MM-280337	UNKNOWN " " ...WIDE BELT CLEANER
$ 720	This machine cleans wide belts by rotating them through trought filled with a cleaning fluid called Rezit, this machine will handle belts up to 42" wi... Click for more.
	New, Never Used	Year: 1997
Southwest	A Great Value for the money!	Photos / Lit.

MW-010082	UNKNOWN " " ...COLD SAW
$ 900	Metalworking cold saw for cutoff work. Click for more.
	Fair Condition	Year:
Southeast	Metalworking cutoff saw!	Photos / Lit.

MM-010723	UNKNOWN " " ...SHOP FAN
$ 1,620	24" Dia. each fan, enclosed metal case, sheet metal fan housing & belt drive motor; ; 10 HP. each motor, 78" x 78" base and 10 feet tall, includes al... Click for more.
	Good condition	Year:
Mexico	Still in "pretty good" condition at a FRACTION of a new machine price!	Photos / Lit.

FD-010560	UNKNOWN " " ...TOP & BOTTOM PANEL CLEANING BRUSH
$ 1,800	Ensures substrate is free of any dust or embedded chips on either side before gluing or coating. ; 50" Width cap., 8-1/2" dia. top & bottom fiber bru... Click for more.
	Fair Condition	Year:
Southeast	Panel Brush!	Photos / Lit.

DO-280363	UNKNOWN " " ...FAN/BLOWER ASSEMBLY
$ 2,500	NEW RECONDITIONED NEW PADDLES,BEARINGS,40 HP 3-PH WITH BELTS AND PULLEYS 25 INCH INLET 22 INCH OUTLET WITH NORFAB ADAPTER Y DUST PIPE Click for more.
	Reconditioned	Year: NA
Southeast	GREAT BARGAIN	Photos / Lit.

EC-010337	UNKNOWN " " ...ELECTRICAL PANELS
$ 2,800	(2) Small Electrical Panels. ; These can be used for a wide variety of machines or even as tool storage bins for your CNC. Click for more.
	Good condition	Year:
Midwest	These can be used to replace your current cabinet or keep your tools safe!	Photos / Lit.

FD-010561	UNKNOWN " " ...TOP & BOTTOM PANEL CLEANING BRUSH
$ 4,500	Ensures substrate is free of any dust or embedded chips on either side before gluing or coating. ; 50" Width cap., 8-1/2" dia. top & bottom fiber bru... Click for more.
	Fair Condition	Year:
Southeast	Panel Brush!	Photos / Lit.

MW-010117	UNKNOWN " " ...HYDRAULIC COLD PRESS
$ 6,530	Platen area 36", side loading 36" side. 4-3/4" diameter (120 mm) piston, 10 HP.; Shipping dimensions 44" x 39" x 112" H. Click for more.
	Good condition	Year: NA
Midwest	Nice heavy duty press used in the plastic industry but can do metals.	Photos / Lit.

PC-010570	UNKNOWN " " ...HYDRAULIC COLD PRESS
$ 7,250	Platen area 36", side loading 36" side. 4-3/4" diameter (120 mm) piston, 10 HP.; Shipping dimensions 44" x 39" x 112" H. Click for more.
	Good condition	Year: NA
Midwest	Nice heavy duty press used in the plastic industry but can do metals.	Photos / Lit.

MC-011157	UNKNOWN " " ...ROLLER CONVEYOR
$ 30,000	750 meters, 2460 ft, mostly sections of: 12', 10' & 6'length and 33" wide, Price per lineal ft: $ 10.50, 12 Transfer carts, 101" long x 33" wide, ma... Click for more.
	Good condition	Year:
Eastern Cdn	still in production, available for inspection,	Photos / Lit.

LC-010638	UNKNOWN "1/4 HP " ...LATHE
$ 90	Complete lathe equipped with a 1/4 HP Dayton Motor "6K890" running at 1725 RPM. Click for more.
	Fair Condition	Year:
West Coast	Perfect lathe for the small shop!	Photos / Lit.

DO-010948	UNKNOWN "100 HP " ...BLOWER
$ 3,500	TOSHIBA energy series 100 HP 1175 RPM motor with blower, direct drive 42" Dia. 22" deep (8) blade fan, 30" Dia. innlet and outlet, both units mounted ... Click for more.
	As-Is, good or bad	Year:
West Coast	Plenty of zoom to this!	Photos / Lit.

AC-280441	UNKNOWN "10HP " ...AIR COMPRESSOR (PISTON)
$ 770	10 HP Motor, single-stage piston type design with precision ground pistons and cast iron heads & crankcase. ; with 100 to 120 gal. horizontal tank. ... Click for more.
	As-Is, good or bad	Year: NA
Southwest	"Was quiet and efficient when taken out of service years ago"	Photos / Lit.

MC-011068	UNKNOWN "12" x 138" " ...CONVEYOR (POWERED)
$ 2,450	One (1) Used Trough Style Belt Conveyor, 11'6" long, 13" wide, 6" deep, 12" belt. ; 2HP SKK TEFC 230/460 premium efficiency gearmotor, drive guard, 6... Click for more.
	Good condition	Year:
Pacific Northwest	A Great Value for the money!	Photos / Lit.

MC-280283	UNKNOWN "12" x 138" " ...CONVEYOR (POWERED)
$ 3,500	One (1) Used Belt Conveyor, 11'6" long, 16" wide, 6" deep, 16" belt. ; Tatung co. (1/2 hp) TKKE 230/460 High efficiency gearmotor, drive guard, 6... Click for more.
	Good condition	Year: 2004
Southwest	Conveyor and table were used on a straight line rip saw to return material stock. Must sell because of less room in new shop.	Photos / Lit.

MC-011082	UNKNOWN "14" X 20" PIVOTING " ...PIVOTING CONVEYORS
$ 4,450	This 14' long x 20" wide incline case conveyor is powered by a 1-hp, three-phase electric drive motor. It is equipped with Jack-Shaft post sections, p... Click for more.
	Good condition	Year:
Midwest	A Great Value for the money!	Photos / Lit.

CF-010879	UNKNOWN "144" X 59" X 68" " ...FACE FRAME ASSEMBLY CLAMP
$ 540	Complete face frame table ready to go. Table Dimensions: 144" x 59" x 68" Click for more.
	Good condition	Year:
West Coast	Great looking Face Frame Table!	Photos / Lit.

EC-010358	UNKNOWN "15 " ...HYDRAULIC PUMP
$ 1,100	15 HP motor, approximately 50 gal. storage tank for hydraulic fluids. Click for more.
	Good condition	Year: NA
Midwest	large enough for several motors!	Photos / Lit.

DO-011006	UNKNOWN "16" OPENING " ...ROTARY AIR LOCK
$ 900	Rotary air lock with 16" diameter opening and 30" vane housing. No motor included. Click for more.
	As-Is, good or bad	Year:
Pacific Northwest	AS is...Make Offer!	Photos / Lit.

MC-011081	UNKNOWN "16" x 16' " ...INCLINE BELT CONVEYOR
$ 1,945	This 16' long x 16" wide incline conveyor with a 12" wide belt is powered by a 1/2 HP, electric motor. Adjustable height. Click for more.
	Good condition	Year:
Midwest	A Great Value for the money!	Photos / Lit.

MR-280002	UNKNOWN "16ft x 4ft " ...WOOD TABLES
$ 450	2" x 10" and 2" x 12" construction. 16' x 4' Covered with heavy duty vinyl. Appr. 32" tall. Some with a lower shelf. Click for more.
	Good condition	Year: n/a
Mid-atlantic	A GREAT value for tables!	Photos / Lit.

MB-010090	UNKNOWN "2' x 50' " ...PORTABLE CONVEYOR
$ 7,020	Stacking conveyor; 50' long x 2' wide with a 17-1/2" wide chevron belt; powered by a heavy-duty air-cooled WISCONSIN gas engine. ; Includes self-clea... Click for more.
	Good condition	Year:
Midwest	A Great Value for the money!	Photos / Lit.

AG-010032	UNKNOWN "2' x 50' " ...PORTABLE CONVEYOR
$ 7,800	stacking conveyor; 50' long x 2' wide with a 17-1/2" wide chevron belt; powered by a heavy-duty air-cooled Wisconsin gas engine; includes self-cleanin... Click for more.
	Good condition	Year:
Midwest	A Great Value for the money!	Photos / Lit.

TC-010167	UNKNOWN "2" " ...CUTTERHEAD (MOULDER)
$ 110	6" Dia. x 2" long x 4-knife hydraulic locking head. Click for more.
	Good condition	Year:
West Coast	A Great Value for the money!	Photos / Lit.

DC-011501	UNKNOWN "20 HP " ...FAN AND BLOWER
$ 1,850	20 HP Material Blower with 36" diameter case w/ 13" diameter inlet and outlet. ; 8" X 26" fan with six (6) 5/16" blades and full 26" backing ring. 20... Click for more.
	Very good condition	Year:
Pacific Northwest	A Great Value for the money!	Photos / Lit.

MB-010114	UNKNOWN "20' X 6' " ...WIDE INCLINE CONVEYOR
$ 10,900	This unit is a 20'-6" long x 6'-10" wide incline conveyor with a 60" wide belt and 2" cleats every two feet. ; Powered by a 3-hp, 230/460 volt, three... Click for more.
	Good condition	Year:
Midwest	This Hard to Find Wide Incline Conveyor Won't Last Long...Order Today!	Photos / Lit.

Page 1 Page 2 Page 3 Page 4

Page 1 Of 4 Total Return To Top

Print this page

1805 Sardis Road North - Charlotte, North Carolina 28270 USA
Phone: +1 704-841-2001 Fax: +1 704-841-1200
Customer Service: Christiane Hallak

Warehouse / CNC & Machine Reconditioning Center
8191 Logistic Drive - Zeeland, Michigan 49464 USA
Phone: + 1 616-772-1520 Fax: +1 616-772-1690
Customer Service: Amanda Palmer

Copyright © 2010 EX-FACTORY INC. All rights reserved.
----- Privacy Policy / Terms & Conditions of Sale -----