Used and New Equipment For Sale

Manufacturer: - 12 Listings

Refine search criteria by category, condition and region below.

Page 1 Of 1 Total

Page 1

SS-010882	EKSTROM/CARLSON "112 " ...EDGE SANDER (OSCILLATING)
$ 2,495	Single sided, 60" X 8" platen size, single table 11" X 60", 5 HP main motor, 8" X 166" abrasive belt, 4,400 FPM belt speed, tilting front table 0 - 45... Click for more.
	Good condition	Year:
Northeast	Great for inside curved or irregular sanding!	Photos / Lit.

SH-011089	EKSTROM/CARLSON "162 " ...SINGLE SPINDLE SHAPER
$ 1,250	1-1/8" Dia. x 5" long detachable spindle, 5 HP belt drive motor, 8,500 RPM spindle speed, automatic bearing lubrication; 40" x 38" table size. ; Comp... Click for more.
	Good condition	Year:
Northeast	An oldie but a goodie - this shaper will run forever!	Photos / Lit.

SH-011139	EKSTROM/CARLSON "162 " ...SINGLE SPINDLE SHAPER
$ 2,250	1-1/4" Dia. with 4-1/2" under the nut, 5 HP belt drive motor, 8,500 RPM spindle speed, automatic bearing lubrication; 40" x 38" table size. ; Complet... Click for more.
	Very good condition	Year:
West Coast	Kept with lots of TLC by the owner!	Photos / Lit.

RM-010494	EKSTROM/CARLSON "327 " ...OVER ARM ROUTER
$ 1,620	28" Max. throat cap., 5 HP motor - 10,000 & 20,000 RPM spindle; mechanical spindle stroke up to 4" max., raise & lower table movement with foot pedal;... Click for more.
	Cleaned and checked	Year: 1980's
Mid-atlantic	Solid Cast Iron Pin Router available at the price of imported light weight!	Photos / Lit.

RM-010269	EKSTROM/CARLSON "327 " ...OVER ARM ROUTER
$ 3,200	28" Max. throat cap., 5 HP motor - 10,000 & 20,000 RPM spindle. ; Mechanical spindle movement with foot pedal; 24" x 36" non-tilting table. ; Equipp... Click for more.
	Good condition	Year:
South	This "327" has a 10 HP motor, and is in good working order!	Photos / Lit.

RM-010605	EKSTROM/CARLSON "434 " ...OVER ARM ROUTER
$ 1,220	28" Throat cap., 5 HP belt drive motor, 10,000 & 20,000 RPM spindle speeds, manual sliding spindle, 36" X 42" Non-tilting table. Complete with: Collet... Click for more.
	As-Is, good or bad	Year:
West Coast	With a little work, you can have a good machine cheap!	Photos / Lit.

RM-010764	EKSTROM/CARLSON "434 " ...OVER ARM ROUTER
$ 1,595	5 HP Motor, 10,000 & 20,000 RPM spindle, mechanical descending spindle movement with foot pedal (4" travel); 7-7/8" vertical table adjustment, 24" x 3... Click for more.
	Good condition	Year:
Southeast	Sturdy and reliable!	Photos / Lit.

RM-270009	EKSTROM/CARLSON "434 " ...OVERHEAD ROUTER
$ 2,250	34" Throat cap., 7.5 HP belt drive motor, 10,000 & 20,000 RPM spindle speeds. ; 36" X 42" tiltable table. ; Complete with: Foot actuated spindle tra... Click for more.
	Good condition	Year: 1965
Southeast	This is an older machine, but look at the $ $ $'s	Photos / Lit.

RL-010099	EKSTROM/CARLSON "444 " ...CNC ROUTER
$ 7,380	Potential 9-head, 6.5 HP or 4.6 HP ea., heads can be mounted on 7" centers, fixed 36" x 130" table, router spindles are 18,000 or 25,200 RPM, water co... Click for more.
	Fair Condition	Year: 1982
Southwest	A lot of machine & equipment value for the money!	Photos / Lit.

BV-010579	EKSTROM/CARLSON "448 " ...BORING (VERTICAL)
$ 1,350	(2) Spindles w/ the following motor arrangement: (2) 1 HP motors that would drive (2) single drilling spindles.; The drill heads are adjustable front... Click for more.
	Good condition	Year:
Pacific Northwest		Photos / Lit.

MP-010661	EKSTROM/CARLSON "464 " ...MOULDER
$ 5,220	4 Head, 6" cap. push feed moulder. ; Head sequence: top 5 HP, left 5 HP, right 5 HP, bottom 5 HP. Variable feed speed 25 - 225 FPM, 1-13/16" diameter... Click for more.
	As-Is, good or bad	Year: 1957
South	They don't BUILD them like this ANYMORE!	Photos / Lit.

RS-010928	EKSTROM/CARLSON "E " ...STRAIGHT LINE RIP-SAW
$ 3,600	15 HP - 3,600 RPM Main arbor motor, direct drive bottom mount, 4" max. thickness using an 18" dia. blade, 2" dia. arbor, 25-3/4" throat clearance. ; ... Click for more.
	As-Is, good or bad	Year:
Eastern Cdn	Heavy duty saw.....as taken from service	Photos / Lit.

Page 1

Page 1 Of 1 Total Return To Top

Print this page

1805 Sardis Road North - Charlotte, North Carolina 28270 USA
Phone: +1 704-841-2001 Fax: +1 704-841-1200
Customer Service: Christiane Hallak

Warehouse / CNC & Machine Reconditioning Center
8191 Logistic Drive - Zeeland, Michigan 49464 USA
Phone: + 1 616-772-1520 Fax: +1 616-772-1690
Customer Service: Amanda Palmer

Copyright © 2010 EX-FACTORY INC. All rights reserved.
----- Privacy Policy / Terms & Conditions of Sale -----